Lowrance 5x Essential Bundle

Items

$289 $289
$45 $45
$19 $19
BerleyPro Lowrance Hook2 5 Visor [Delivered]
$44
$44
 (Sold Out)
$
$
$60 $60

Description

FPV-Power Kayak Battery Combo 12V 17.5AH [Delivered]

FPV-Power Kayak Battery Combo 12V 17.5AH FPV-Power Kayak Battery Combo 12V 17.5AH

FPV-Power Kayak Battery Combo 12V 17.5AH

Introducing the FPV-Power Kayak Battery and Charger Combo - your ultimate solution for powering larger fishfinders and GPS devices during those long fishing trips! Designed specifically for kayak fishermen, this combo includes a high-capacity 17.5Ah lithium battery with a built-in battery management system (BMS) to ensure safe operation in any condition. The waterproof hard case (IP67) keeps your investment protected from splashes or accidental submersion while connected to your device.

The FPV-Power 17.5Ah battery suits kayak fishermen who run larger fishfinders or GPS systems that typically draw more than 1A of power. These devices may need a voltage regulator as some fishfinders require a minimum of 11V to run properly.

With around 17 hours of use on a single charge, you can rely on the FPV-Power Kayak Battery Combo to keep you powered up throughout your fishing adventures without worrying about running out mid-fishing trips.

Don't let a dead battery ruin your fishing experience - invest in the reliable and powerful FPV-Power Kayak Battery and Charger Combo today!

FPV-Power Kayak Battery Combo 12V 17.5AH FPV-Power Kayak Battery Combo 12V 17.5AH

Features:

  • High-Capacity Battery: The battery provides ample power for larger fishfinders and GPS devices, ensuring extended usage during long fishing trips.
  • Convenient Wall Charger: The 2A wall charger allows for easy and hassle-free charging of the battery, ensuring you stay powered up on the water.
  • Built-in Protection: The battery features short circuit and overcurrent protection, with charging and discharging safety cutoffs, guaranteeing safe operation in any condition.
  • Designed for Kayak Fishermen: Tailored specifically for kayak fishing enthusiasts, this product addresses the higher energy demands of larger fish finders and GPS systems commonly used by kayak fishermen.
  • Reliable Power: The combo offers reliable power throughout your journey, eliminating the worry of running out of battery in the middle of your fishing expedition.

Specifications:

  • Brand: FPV-Power
  • SKU: FPV-17.5AH-BAT-CHAR-V
  • MPN: 10391
  • UPC: 5707823482574
  • Length: 13 cm
  • Width: 8 cm
  • Height: 7 cm
  • Weight: 915 gm (battery), 1200 gm (package weight)
  • Voltage: 7.5-12.6V
  • Capacity: 17500 maH
  • Amp Draw: 10A MAX
  • Cycles: 4200 @ 1A Discharge 90% Depth of Discharge
  • Charger: 2A Wall Charger

Package Includes:

  • 1 x FPV-Power FishFinder Battery
  • 1 x 17.5AH Charger
  • 1 x Waterproof Connector Set
  • 2 x Crimp Shrinks
  • 1 x Male Pigtail

Warning & Disclaimer:

  • Do not submerge the battery or charger in water. The waterproof feature applies only when the lead is connected.
  • Use the charger provided with the product. Using an incompatible charger may result in damage to the battery or pose a safety risk.
  • This product is designed to meet the higher energy demands of larger fish finders and GPS systems used by kayak fishermen. However, it may not be compatible with all fish finder models. Please check the voltage and power requirements of your device before use.
  • Some fish finders may require a minimum voltage of 11V to operate. If your fish finder falls into this category, you may need to use a voltage regulator in conjunction with the battery.

Railblaza Fish Finder Mount R-Lock S [Delivered]

Railblaza Fish Finder Mount R-Lock S Railblaza Fish Finder Mount R-Lock S

Railblaza Fish Finder Mount R-Lock S

Introducing the Railblaza Fish Finder Mount R-Lock S, a reliable and durable platform for mounting fish finders. This low-profile mount is designed with a top and bottom featuring R-Lock to mount your fish finder or chart plotter securely. With its strong lock, this mount can support fish finders weighing up to 1.5 kg.

It is compatible with plotters with square or round bases, making it versatile for various devices on the market. Its friction joints at the top and bottom are fully adjustable in 15-degree increments, ensuring stability even in choppy waters.

What sets this mount apart is its centre joint, which is also fully adjustable according to your preference. This allows you to position your device exactly where you need it while maintaining stability throughout your fishing trip.

It is made of UV-stabilised fibreglass reinforced plastic material composition, which guarantees durability against harsh weather conditions commonly encountered during fishing expeditions.

In summary, if you're looking for a secure and accessible solution for mounting your fish finder or chart plotter on any vessel - be it a kayak or larger boat - look no further than the Railblaza Fish Finder Mount R-Lock S. Why wait? Order yours today!

Railblaza Fish Finder Mount R-Lock S Railblaza Fish Finder Mount R-Lock S

Features:

  • Strong Lock: It provides one of the industry's strongest locks, securing your device firmly in place.
  • Adjustable Friction Joints: The 3-axis mount has friction joints that can be adjusted in 15-degree increments, ensuring stability in rough waters.
  • Durable Material: Made from UV-stabilised, fibreglass-reinforced plastic, it stands up to harsh weather conditions.
  • Wide Compatibility: Works well with popular brands such as Lowrance Hook2, Lowrance Elite, Garmin Striker Plus, Garmin Echomap, Humminbird PiranhaMAX, and Raymarine Dragonfly.
  • Easy Installation: Thanks to its compact design, it can be installed anywhere on your kayak or other watercraft.

Specifications:

  • Brand: Railblaza
  • SKU: RB-FFINDERMT-RLOCK-S-V
  • MPN: 02-4140-11
  • UPC: 9421026833785
  • Length: 50 mm
  • Width: 100 mm
  • Height: 120 mm
  • Weight: 190 gm

Package Includes:

  • 1 x Fish Finder Mount

Warning & Disclaimer:

  • Ensure the product is securely mounted before setting out. It is essential to avoid accidents and damage to your equipment.
  • While the fish finder is designed to fit a range of devices, the manufacturer does not guarantee compatibility with all models. Check your device's specifications before purchase.
  • Always monitor your mounted device, especially in harsh weather conditions. Regular adjustments may be needed to maintain optimal viewing angles.

Railblaza MiniPort TracMount Base [Delivered]

Railblaza MiniPort TracMount Base Railblaza MiniPort TracMount Base

Railblaza MiniPort TracMount Base

Introducing the Railblaza MiniPort TracMount Base, a game-changer for outdoor enthusiasts who love to fish, take photos, or hit big waves. Say goodbye to tedious tools and frustrating rigging with this innovative base that requires no tools whatsoever. With just a quick twist here and there by turning the MiniPort which tightens directly in the track using TracNuts, you can reposition your fishing accessories in seconds without any hassle!

The mount is compatible with every track on the market including Wilderness Systems, Native Watercraft, Jackson Kayak, YakAttack, Scotty, YakGear, and their very own Railblaza tracks. This means you won't have any trouble finding the perfect position for your gear so that it's always within reach when needed most.

It is made from UV-stabilised fibreglass reinforced plastic material composition which makes it lightweight at only 140 g (0.30 lbs), yet durable enough to withstand harsh weather conditions while out on adventures.

This product allows easy installation of StarPort Railblaza Accessories making mounting effortless even if done by one person since no tool is required during the setup or adjustment process.

In summary, the Railblaza MiniPort TracMount Base is a versatile, user-friendly solution for outdoor enthusiasts who demand convenience and reliability. Whether you love fishing, photography or watersports, this product has got you covered. Get yours today!

Railblaza MiniPort TracMount Base Railblaza MiniPort TracMount Base

Features:

  • Tool-less Operation: The base allows for easy fitting and adjustment without the need for tools, making rigging quicker and more convenient.
  • Universal Fit: Designed to fit most existing tracks, including popular brands like YakAttack, Wilderness Systems, Native Watercraft, and Yak Gear, providing versatility for your craft.
  • Adjustable Positioning: Effortlessly adjust and reposition the base in the track by simply turning it to release tension and move it to the desired location.
  • Light-duty Applications: Specifically designed for light-duty applications, such as trolling with a RodHolder.

Specifications:

  • Brand: Railblaza
  • SKU: RB-MINIPORT-TRACMT-V
  • MPN: 03-4108-11
  • UPC: 856154004612
  • Weight: 140 g (0.30lbs)
  • Length: 43 mm (1.7 in)
  • Width: 41 mm (1.6 in)
  • Material: Stainless Steel (TracNut)
  • Compatibility: Fits most existing tracks on a variety of kayaks, including those from YakAttack, Wilderness Systems, Native Watercraft, and Yak Gear

Package Includes:

  • 1 x MiniPort TracMount

Warning & Disclaimer:

  • Light-Duty Use: The base is designed for use in light-duty applications. Avoid using it for heavy-duty tasks that exceed its intended capacity.
  • Proper Positioning: If using the product for trolling with a RodHolder, it must be mounted on the right-hand (starboard) side. This ensures that the base tightens when a load comes on from a strike. Using it on the left-hand (port) side may cause the base to loosen when a load comes on the fishing rod.
  • Installation and Adjustment: Ensure proper installation and adjustment by following the provided instructions. Failure to do so may result in an insecure fit or improper positioning.
  • Light-Duty Applications Only: This base is specifically designed for light-duty applications and may not be suitable for heavy-duty or high-stress use. Avoid exceeding its recommended capacity or subjecting it to excessive force.
  • Disclaimer: While the product is designed to provide convenience and versatility, it has its limitations. It is the user's responsibility to ensure proper usage, installation, and adherence to weight limits. Railblaza is not liable for any damage, injury, or misuse of the base resulting from non-compliance with instructions or exceeding its intended use.
  • Additional Notes:
  • Always inspect the product and TracNut for wear, damage, or signs of loosening before each use. Replace any worn or damaged components immediately.
  • Ensure the base is securely tightened in the track to prevent movement during use.
  • For maximum compatibility, confirm the compatibility of the base with your specific kayak track system before purchase.
  • Follow all safety guidelines and instructions provided by Railblaza for the safe and proper use of the product.

BerleyPro Lowrance Hook2 5 Visor [Delivered]

BerleyPro Lowrance Hook2 5 Visor BerleyPro Lowrance Hook2 5 Visor

BerleyPro Lowrance Hook2 5 Visor

Introducing the BerleyPro Lowrance Hook2 5 Visor, a must-have accessory for your fish finder! Designed to keep sun glare and water on the screen at bay, this product not only reduces glare but also provides splash protection. Made from durable ABS plastic, it's perfect for both kayaks and powerboats.

With the visor, you can now enjoy reduced screen brightness without compromising visibility. This means longer battery life and reduced need to recharge or replace batteries – a great benefit when out fishing all day long. The bonus of splash protection ensures that your fish finder stays clean even in rough waters.

Installation is quick and easy with the included mount – simply attach it to your device within minutes! Compatible with Lowrance Hook2 5 models, this product offers superior screen protection while enhancing overall performance on open-water adventures. Its design aims to make your fish-finding expeditions more efficient and enjoyable.

In conclusion, the BerleyPro Lowrance Hook2 5 Visor is an essential companion for every angler's fishing trip. This visor brings together convenience, durability, and thoughtful design, making it an indispensable accessory for every fish finder. With its ability to reduce sun glare and protect against water on the screens, it enhances visibility and extends battery life. The simple installation process with the mount ensures quick setup. So why wait? Get yours today.

BerleyPro Lowrance Hook2 5 Visor BerleyPro Lowrance Hook2 5 Visor

Features:

  • Specific Fit: This visor is made just for the Lowrance Hook2 5. It gives a snug fit for effective shielding.
  • Glare Reduction: It cuts down screen glare. That makes viewing easy in bright sunlight.
  • Durable: Made from high-quality material. It can withstand harsh conditions.
  • Protective: Shields your screen from scratches and splashes.
  • Easy Install: No fuss setup. It attaches in minutes, no tools needed.

Specifications:

  • SKU: BP-1720-V
  • Brand: BerleyPro
  • MPN: BP1720
  • Length: 210 mm
  • Width: 110 mm
  • Height: 80 mm
  • Weight: 150 gm
  • Material: ABS Plastic

Package Includes:

  • 1 x BerleyPro Lowrance Hook2 5 Visor
  • 1 x Velcro for installation

Warning & Disclaimer:

  • Ensure proper installation to prevent damage.
  • Avoid exposing the visor to extreme temperatures.
  • Do not use excessive force while attaching or removing the product.
  • Use caution when operating your fish finder in rough waters.

Disclaimer: The visor is designed to enhance the functionality of your fish finder; however, it may not eliminate all glare or provide complete protection against all potential hazards. Users are responsible for ensuring the safe and proper use of their fish finders and should exercise caution while operating in challenging conditions.

Note: The product is specifically designed for a particular fish finder model and may not be compatible with other devices. Always refer to the product manual and follow manufacturer guidelines for optimal usage.

Railblaza Kayak and Canoe Fishfinder and Transducer Mounts [Delivered]

Railblaza Kayak and Canoe Fishfinder and Transducer Mounts Railblaza Kayak and Canoe Fishfinder and Transducer Mounts

Railblaza Kayak and Canoe Fishfinder and Transducer Mounts

Introducing the Railblaza Kayak and Canoe Fishfinder and Transducer Mounts - your ultimate solution for kayak anglers needing an easy way to install and remove fish finders or sounders! This mount kit offers a unique advantage as it can be adapted to fit any kayak or canoe, allowing you to use the kayak for other activities when you don't need the transducer.

The selection of mounts in this kit ensures that there's one to fit any type of kayak or canoe out there. Plus, if needed, add an extension for deeper transduction in shallow water simply by rotating the platform without messy adhesives or excessive drilling required!

Made from UV-stabilised fibreglass reinforced plastic material composition, this lightweight yet durable mount kit has been developed specifically with kayakers' needs in mind. The quick installation process allows you to easily transfer the sounder from one kayak or canoe to another using just one click of the StarPort slide lock.

In summary, whether you're a seasoned angler looking for an easy way to install and uninstall your fishfinder while enjoying other activities on your kayak/canoe or someone who wants accurate readings even in shallow waters – look no further! Order yours today!

Railblaza Kayak and Canoe Fishfinder and Transducer Mounts Railblaza Kayak and Canoe Fishfinder and Transducer Mounts

Features:

  • Easy Installation: The mounts are a breeze to set up. No need for technical skills, meaning you can get onto the water faster.
  • Flexible Mounting Options: Customise your kayak or canoe setup to your liking. These mounts let you place your fishfinder and transducer where they're most useful to you.
  • Robust Construction: Made from high-quality materials, they are designed to withstand the wear and tear of regular use. They'll hold up even in tough conditions, so you don't need to worry about your equipment when you're out on the water.
  • Locking System: These mounts come with a unique locking system. This means your fishfinder and transducer will stay put, even when you're paddling hard or facing choppy waters.
  • Compatibility: These mounts are versatile and work well with most fishfinders and transducers available on the market. This means you can use them with the equipment you already have.
  • 360-degree Rotation: One of the best features of these mounts is their 360-degree rotation. You can turn your fishfinder or transducer in any direction you want. This gives you a full view of what's happening underwater, increasing your chances of finding fish.

Specifications:

  • Brand: Railblaza
  • SKU: RB-TRANSDUCER-ARM-V
  • MPN: 02-4061-11
  • UPC: 9421026832696
  • Material: UV Stabilised Fiberglass Reinforced Plastic
  • Weight: 263 gm (0.58 lbs)
  • Length: 235 mm (9.2 in)
  • Width: 85 mm (3.4 in)
  • Mounting Options: Track mounted or hard mounted
  • Compatibility: Any kayak, canoe, or paddleboard

Package Includes:

  • 1 x SwivelPort
  • 1 x Adjustable Knuckle joint (not available as a separate part)
  • 1 x Fixed StarPort Extender
  • 1 x Cheek Mount Adaptor (not available as a separate part)
  • Cable Ties

Warning & Disclaimer:

  • Caution: Always exercise caution and follow safety guidelines while installing or using the product. Improper installation or use may result in damage to your equipment or kayak.
  • Limitations: The mounts are designed for use with fish finders and transducers on kayaks, canoes, and paddleboards. It may not be suitable for other applications
  • Risk of Damage: While the mounts are made from durable materials, it is not indestructible. Avoid excessive force or impact that may cause damage to the arm or your equipment.
  • Note: The mount does not include Railblaza Bases, which are required for installation. Ensure you have the necessary bases for your specific watercraft before purchasing.